Alerts
Therbie on iPhone and iPad can send you a notification in four cases: the device turns Hot, memory use passes a level you choose, the battery charges to a level, or the battery runs low. Alerts only work while Therbie is running:
- while Therbie is on screen;
- while the floating monitor is open;
- while a sensor keeps Therbie running in the background, for example during a trip.
When iOS has paused Therbie, nothing is checked.
Turn alerts on
- Tap ⋯ › Alerts.
- Switch on the alerts you want. iOS asks for notification permission the first time you turn one on. Therbie doesn't ask at launch.
- Tap Send Test Alert to see what an alert looks like.
All four alerts are off until you turn them on.
| Alert | Fires when | Setting |
|---|---|---|
| Hot | The thermal state reaches Hot or Critical | None |
| High memory | Memory in use (App, Wired and Compressed) reaches the level | 70% to 95% in steps of 5. Default 90% |
| Charged to | The battery reaches the level while charging | 50% to 100% in steps of 5. Default 80% |
| Battery low | The battery drops to the level while on battery power | 5% to 50% in steps of 5. Default 20% |
If notifications are turned off for Therbie in iOS Settings, the Alerts sheet says so and shows Turn On in Settings.
When an alert fires
- Only on a change. An alert fires when a reading reaches its level while Therbie is watching, not because it was already past the level when Therbie started. For example, if the battery is already at 85% when you open Therbie, Charged to 80% won't fire until the level drops below 80% and rises again.
- Not over and over. The same alert doesn't repeat within 10 minutes, even if you close and reopen Therbie.
- Re-arming:
- Hot can fire again only after the device has been Warm or cooler for 2 minutes.
- High memory re-arms once use drops 5 points below the level.
- On devices that report single percents, a battery alert re-arms once the level moves 2 points back past it. On devices that report 5% steps, it re-arms one step back.
- Not after a gap. If Therbie hasn't taken a reading for more than 2 minutes, for example because it was closed, the alerts start over. Opening the app never brings up an old alert.
- "About" on 5%-step devices. Where iOS gives the battery level in 5% steps, the alert says "Battery at about 80%".
- One of each kind. A new alert of the same kind replaces the old one in Notification Centre.
Why alerts need Therbie running
iOS pauses apps a few seconds after you leave them, and a paused app can't read the battery or the thermal state. So a charge alert only works while Therbie is running. Why background alarms are rare explains more.
Tip Charging to 80%? Start the floating monitor, tuck it at the edge of the screen, and carry on. Therbie tells you when the battery gets there. For a charge alert that works with Therbie closed, use a Shortcuts automation instead: Automation › New › Battery Level › Rises Above 80%. The Shortcuts & Siri sheet in Therbie shows how.